What to check before buying a lone worker alarm
Working alone comes with obvious risks, and a good safety device can mean the difference between getting help in seconds and not getting it at all. But not all alarms are built the same, and the wrong choice can leave you with a false sense of security. Before you buy, it pays to run through a short checklist so you know what your device can and cannot do when something goes wrong.
Start with the alarm trigger: how do you call for help?
Every lone worker alarm needs a way to start an alert. The most basic is a manual SOS button, but when you are unconscious, pinned under something, or unable to reach the button, that alone is not enough. Look for a device that also includes automatic fall detection or a man-down timer. Fall detection uses built-in sensors to recognise a sudden impact and a lack of movement, then raises the alarm without you pressing anything. A man-down timer works differently: if the device does not detect motion for a set period, it assumes you have stopped moving and triggers the alert. Both features cover the scenario where you cannot act yourself. Check that the sensitivity can be adjusted. Too sensitive and you get false alarms; not sensitive enough and a real fall might be missed.
Check the communication method: does it work where you work?
Most alarms use cellular networks or satellite connections. If you work inside a building with thick walls, a basement, or a remote rural area, a device that relies only on mobile phone coverage may fail exactly when you need it. Look for a device that combines GPS and cellular connectivity, or one that can fall back to satellite messaging if the cell signal drops. The GPS part is what lets responders find your exact location, so it matters that the device locks onto satellites quickly and maintains that lock. Some cheaper alarms only report a location after the alert is pressed; better ones update the location continuously so the last known position is already recorded if you cannot press anything.

Understand the monitoring setup: who gets the alert?
There are two broad approaches. One is a monitored service where a call centre receives every alert and contacts emergency services or your nominated contacts. The other is direct notification to a pre-set list of people, such as a supervisor or family member, who then decide what to do. Both can work, but the key question is response time. A monitored service removes the burden from your colleagues, but it often comes with monthly fees and contracts. Direct notification keeps costs lower but relies on the person receiving the alert being available and able to act. Some devices let you switch between modes depending on the job. The Mercari Lone Worker Alarm NZ, for example, gives you two-way voice communication so the person on the other end can talk to you and assess the situation before sending help. That kind of feature can cut down on unnecessary call-outs while still getting you help fast when it is serious.
Battery life and charging: will it last your whole shift?
A dead battery is the same as no alarm at all. Check the rated battery life under real-world conditions, not just the manufacturer's ideal number. GPS and cellular transmission drain power faster than simple Bluetooth devices. Some alarms last a full working week on a charge; others need daily charging. Think about how you will keep it charged. If you are on the road or in the field for days at a time, a device with a removable battery or a long standby time matters more. Also check whether the device warns you when the battery is low. A simple LED indicator is better than nothing, but a device that sends a low-battery alert to your phone or to the monitoring centre is far more reliable.
Durability and wearability: will it survive your work environment?
An alarm that clips to a belt might work fine in an office, but if you work in construction, farming, forestry, or any environment where the device can get knocked, wet, or covered in dust, it needs an IP rating that matches. Look for at least IP65, which means it is dust-tight and can handle water jets. Also consider how you wear it. A pendant around the neck stays accessible but can swing and get caught on machinery. A belt clip is secure but might be hard to reach in a fall. A wrist-worn device is always on you but can be damaged by impact. Some workers prefer a device that fits into a high-vis vest pocket with a lanyard. Choose the form factor that you will actually wear every shift, because an alarm left in the truck is no help at all.

Account for environmental limits
GPS and cellular signals degrade in certain conditions. Heavy tree cover, deep valleys, metal buildings, and underground work sites can block or weaken the signal. No consumer device works perfectly in every environment, so be realistic about where you spend most of your time. If you regularly work underground or inside large steel structures, look for an alarm that uses Wi-Fi positioning or Bluetooth beacons as a backup to GPS. Some sites install their own beacon network so the device can still report a location indoors. That kind of setup costs more but may be necessary for some industries. If you only work outdoors in open areas, a standard GPS alarm will do the job.
Two-way voice: a feature worth understanding
Basic alarms only send a location and a distress signal. Two-way voice lets the monitoring centre or your contact talk to you through the device. That can change the outcome. If you press the button by mistake, you can say so and cancel the alert. If you are injured but conscious, you can describe what happened and where you are, even if you cannot move. If the device detects a fall and you do not respond, the person on the other end can call out to you to check if you are okay. That kind of interaction reduces false alarms and makes sure real emergencies get the right response. The Mercari Lone Worker Alarm NZ includes two-way voice communication, which is a practical feature for anyone who works alone and wants a way to talk to a responder without holding a phone.
Check the response chain before you need it
Once you have the device, test the whole chain. Press the SOS button and see who gets notified and how long it takes. If the alert goes to a colleague, make sure that person knows what to do and has the authority to call emergency services. If it goes to a monitoring centre, confirm they have your correct location data and any medical notes you want them to have. Run a test at the start of each shift if you change locations often. A device that works perfectly at your home base may fail at a remote site, and you only discover that when you need it most.

Choosing the right lone worker alarm is not just about ticking boxes on a spec sheet. It is about matching the device to how you actually work, where you work, and what kind of help you need in a crisis. Run through each point on this checklist before you buy, and you will have a much better chance of getting real help quickly when you are on your own.
Mercari Lone Worker Alarm NZ on social media
YouTube